Microsoft Foundry Skill

This skill helps developers work with Microsoft Foundry resources, covering model discovery and deployment, complete dev lifecycle of AI agent, evaluation workflows, and troubleshooting.

Pre-Execution Requirements

Follow each applicable subsection below before starting its corresponding action or workflow.

Dependency Check and Setup

MANDATORY: As the first step after this skill loads, run the dependency check and setup script below from this skill's root and wait for it to finish before continuing. The script checks first and installs only missing dependencies; it does not reinstall dependencies that are already available.

You MUST complete this check before reading or entering any sub-skill, workflow, or workflow-specific reference.

./scripts/check-and-setup-dependencies.sh     # macOS / Linux
./scripts/check-and-setup-dependencies.ps1    # Windows (pwsh)

Strictly follow the script output for subsequent actions.

Workflow Guidance

MANDATORY: Before executing ANY workflow-specific steps, you MUST read the corresponding sub-skill document. Do not call workflow-specific MCP tools for a workflow without reading its skill document. This applies even if you already know the MCP tool parameters — the skill document contains required workflow steps, pre-checks, and validation logic that must be followed. This rule applies on every new user message that triggers a different workflow, even if the skill is already loaded.

Foundry MCP

MANDATORY: Before using Foundry MCP operations, call the Azure MCP foundry tool and inspect the available Foundry MCP tools and related parameters. Treat this as the discovery/help step for MCP-based workflows.

azd

MANDATORY: Before executing ANY azd command, you MUST read azd-guidance and strictly follow the shared rules defined in it, especially the AZURE_DEV_USER_AGENT setting rules.

Sub-Skills

This skill includes specialized sub-skills for specific workflows. When a sub-skill matches the task, strictly follow its workflow:

Sub-Skill	When to Use	Reference
deploy	Deploy hosted agents to Foundry, smoke-test a deployment, create or update prompt agents, and manage agent versions and multi-environment deploys.	deploy
cicd	Set up a CI/CD deployment pipeline for a Foundry agent.	cicd
invoke	Send messages to an agent, single or multi-turn conversations	invoke
routine	Schedule or event-trigger Foundry agents with routines; use azd for CRUD, enable/disable, manual dispatch, and viewing past runs, or define routines in azure.yaml.	routine
invocations-ws	Build, deploy, and connect to hosted agents that speak the invocations_ws duplex WebSocket protocol — voice agents, real-time streams, and signaling for out-of-band media transports.	invocations-ws
observe	Evaluate agent quality, run batch evals, analyze failures, optimize prompts, improve agent instructions, compare versions, set up CI/CD monitoring, and enable continuous production evaluation	observe
trace	Query traces, analyze latency/failures, correlate eval results to specific responses via App Insights customEvents	trace
troubleshoot	View hosted agent logs, query telemetry, diagnose failures	troubleshoot
validate	Use only when the user explicitly asks to use this validation sub-skill or to validate Microsoft Foundry hosted-agent code against best practices. Never invoke it proactively or add it to another workflow.	validate
create (quick start)	Create a new hosted Foundry agent from scratch end-to-end — scaffold, provision or use an existing Foundry project, deploy, and smoke-test. Do not use for any work on existing code. For anything not covered by the quickstart, use create.	create/quick-start-hosted.md
create	Use when the standard end-to-end happy path (quick start) doesn't fit. Create a new Foundry agent, update code of an existing agent, continue development of an existing agent, wire connections at scaffold time, use advanced setup or A2A (Agent2Agent), or recover from a failed quickstart run.	create
agent-optimizer	Make existing Python hosted-agent code optimization-ready, configure eval.yaml, run Agent Optimizer jobs, apply candidates locally, and deploy through azd after review.	agent-optimizer
eval-datasets	Harvest production traces into evaluation datasets, manage dataset versions and splits, track evaluation metrics over time, detect regressions, and maintain full lineage from trace to deployment. Use for: create dataset from traces, dataset versioning, evaluation trending, regression detection, dataset comparison, eval lineage.	eval-datasets
project/create	Creating a new Microsoft Foundry project for hosting agents and models. Use when onboarding to Foundry or setting up new infrastructure.	project/create/create-foundry-project.md
resource/create	Creating Azure AI Services multi-service resource (Foundry resource) using Azure CLI. Use when manually provisioning AI Services resources with granular control.	resource/create/create-foundry-resource.md
private-network	Answer questions about Foundry network isolation and deploy Foundry with VNet isolation (BYO VNet, Managed VNet, hybrid). Covers architecture concepts, template selection, deployment, and post-deployment validation.	resource/private-network/private-network.md
models/deploy-model	Unified model deployment with intelligent routing. Handles quick preset deployments, fully customized deployments (version/SKU/capacity/RAI), and capacity discovery across regions. Routes to sub-skills: preset (quick deploy), customize (full control), capacity (find availability).	models/deploy-model/SKILL.md
quota	Managing quotas and capacity for Microsoft Foundry resources. Use when checking quota usage, troubleshooting deployment failures due to insufficient quota, requesting quota increases, or planning capacity.	quota/quota.md
rbac	Managing RBAC permissions, role assignments, managed identities, and service principals for Microsoft Foundry resources. Use for access control, auditing permissions, and CI/CD setup.	rbac/rbac.md
finetuning	Fine-tune models on Microsoft Foundry — SFT distillation, DPO preference optimization, RFT with graders and tool calling. Dataset preparation, grader calibration, training, checkpoint selection, deployment, evaluation. Use for: fine-tune, SFT, DPO, RFT, training data, grader, distillation, fine-tuned model, large file upload.	finetuning/SKILL.md
azd-guidance	Provide shared azd knowledge and guidance for managing Foundry agents. Read this first for any workflows related to azd.	azd-guidance

💡 Tip: For a complete onboarding flow: project/create (public) or private-network (VNet isolation) → models/deploy-model → agent workflows (create → deploy → invoke).

💡 Fine-Tuning: Use finetuning for all model customization — SFT distillation, DPO preference optimization, and RFT with graders. Includes quickstart, grader calibration, and training curve analysis.

💡 Model Deployment: Use models/deploy-model for all deployment scenarios — it intelligently routes between quick preset deployment, customized deployment with full control, and capacity discovery across regions.

💡 Prompt Optimization: For requests like "optimize my prompt" or "improve my agent instructions," load observe and use the prompt_optimize MCP tool through that eval-driven workflow.

Infrastructure Lifecycle

Match user intent to the correct infrastructure workflow.

User Intent	Workflow
"Create Foundry" / "Set up Foundry" (ambiguous)	Use AskUserQuestion: (a) just an AI Services resource, (b) a project with public access, or (c) a project with network isolation? Route: (a) → resource/create, (b) → project/create, (c) → private-network
Set up Foundry with VNet isolation	private-network
Create a Foundry project (public)	project/create
Create a bare Foundry resource	resource/create

Agent Development Lifecycle

Match user intent to the correct agent workflow. Read each sub-skill in order before executing.

User Intent	Workflow (read in order)
Create a new hosted agent end-to-end (scaffold + deploy + test)	dependency check and setup → azd-guidance → quick-start-hosted (self-contained end-to-end)
Anything beyond the standard quickstart (existing code, migration, re-hosting, deployment customization, scaffold-time connections, A2A (Agent2Agent), recovery)	dependency check and setup → azd-guidance → create → deploy → invoke
Optimize existing Python hosted agent	dependency check and setup → azd-guidance → agent-optimizer → scaffold/review → eval.yaml → optimize → apply candidate → deploy → invoke
Deploy an agent (code already exists)	dependency check and setup → azd-guidance → deploy (includes eval-suite setup) → invoke → observe (evaluate/optimize)
Update/redeploy an agent after code changes	dependency check and setup → azd-guidance → deploy (includes eval-suite setup) → invoke → observe (evaluate/optimize)
Set up a CI/CD deployment pipeline for a hosted agent	dependency check and setup → azd-guidance → cicd
Invoke/test/chat with an agent	dependency check and setup → azd-guidance → invoke
Schedule/event-trigger an agent, or CRUD/enable/disable/dispatch a routine	dependency check and setup → azd-guidance → routine
Optimize / improve agent prompt or instructions	observe (Step 4: Optimize)
Evaluate and optimize agent (full loop)	observe
Enable continuous evaluation monitoring	observe (Step 6: CI/CD & Monitoring)
Troubleshoot an agent issue	dependency check and setup → azd-guidance → invoke → troubleshoot
Fix a broken agent (troubleshoot + redeploy)	dependency check and setup → azd-guidance → invoke → troubleshoot → apply fixes → deploy → invoke

Agent: .foundry Workspace Standard

Every agent source folder can keep Foundry-specific cache and overlay state under .foundry/: